Product Center

产品中心

Electromagnetic Flowmeter

Category: Electromagnetic Flowmeter

8001@huadianauto.com

Product Introduction:

Measures conductive liquids such as tap water, sewage, and acidic or alkaline corrosive liquids, outputs 4-20mA + RS485, customizable for non-full pipe measurement.

Messages

Download

E-mail

Manual

Details
Product Parameters
Solution

- Commodity name: Electromagnetic Flowmeter
- Commodity ID: 1
Measures conductive liquids such as tap water, sewage, and acidic or alkaline corrosive liquids, outputs 4-20mA + RS485, customizable for non-full pipe measurement.

Easy installation, built-in grounding electrode
Convenient operation, equipped with reverse flow indicator
Accurate measurement, 100% device calibration
Safe to use, independent wiring chamber
Intelligent diagnosis, equipped with air duct detection technology

Nominal Diameter	DN10~DN1000
Accuracy	±0.5%FS
Load	≤ 750Ω
Communication Output	RS485, Modbus-RTU Communication Protocol
Power Supply	(100~240)VAC, 50/60Hz / (20~28)VDC
Ambient Temperature	(-10~55)℃
Protection Level	IP65
Electrical Interface	M20*1.5 Cable Gland
Installation Method	Flange / Clamp
Process Pressure	DN10~DN250: PN<1.6MPa; DN300~DN1000: PN<1.0MPa