Enquiry form
(
0
)
这里是产品名称这里是产品名称这里是产品名称这里是产品名称
Channels:
Type of input:
Input signal:
Type of measurement:
Input range:
展开
收起
Output signal:
Power supply mode:
Selected
Vacuum screening
PRODUCTS CENTER
Product Categories
1
0.00
编号:
A DC voltage transmitter is an instrument that isolates and amplifies the voltage signal in a DC system and converts it into a DC voltage or current that is linearly proportional to the input voltage. Continuous operation for a long time to achieve the measurement of DC voltage. This series of products has high measurement accuracy and good conversion linearity.
0.00
编号:
Enter comparison
Number of views:
1014
Keywords:
0.00
编号:
The three-phase AC voltage transmitter is an instrument that simultaneously isolates and amplifies three-phase measured AC signals and converts them into a DC voltage or current that is linearly proportional to the input voltage. It is widely used in power systems and non-electricity. In the system, it can run continuously for a long time to realize the measurement of AC current. This series of products has high measurement accuracy, good conversion linearity, and lightning protection. Among them, the true RMS measurement transmitter and the distortion waveform of the input signal do not affect the measurement accuracy of the instrument.
0.00
编号:
Enter comparison
Number of views:
1009
Keywords:
0.00
编号:
Single-phase AC voltage transmitter is an instrument that isolates the measured AC voltage signal and converts it into a DC voltage or current that is linearly proportional to the input current. It can run continuously for a long time to realize the measurement of AC current. This series of products has high measurement accuracy and good conversion linearity. Among them, the true RMS measurement transmitter does not affect the measurement accuracy of the instrument due to the distortion of the input signal.
0.00
编号:
Enter comparison
Number of views:
1012
Keywords:
0.00
编号:
HD-T13V AC current transmitter uses the principle of electromagnetic isolation to directly convert AC voltage signals from industrial sites into standard analog signals, and the input and output signals have a linear relationship.
0.00
编号:
Enter comparison
Number of views:
1005
Keywords:
0.00
编号:
HD-T2U AC voltage transmitter uses the Hall principle to directly convert AC voltage signals from industrial sites into standard analog signals, and the input and output signals have a linear relationship.
0.00
编号:
Enter comparison
Number of views:
1008
Keywords:
电压
0.00
编号:
HD-D2U DC voltage transmitter uses the principle of electromagnetic isolation to directly convert the DC voltage signal from the industrial site into a standard analog signal, and the input and output signals have a linear relationship.
0.00
编号:
Enter comparison
Number of views:
1009
Keywords:
0.00
编号:
HDH-20R series AC voltage transmitter is to isolate the AC voltage signal and convert it into a standard two-wire analog signal. The output end is powered by a loop.
0.00
编号:
Enter comparison
Number of views:
1025
Keywords:
0.00
编号:
HDH-20 series AC voltage transmitter is used to isolate and convert AC voltage signals into standard analog signals. It is used for DCS to centrally monitor motors, pumps or heat networks, and monitor power supply lines and their currents.
0.00
编号:
Enter comparison
Number of views:
1022
Keywords:
Previous page
1
Next page
© 2019 Huaibei Huadian Automation Technology Co., Ltd. 皖ICP备15001091号-1 Powered by www.300.cn