Product Center

产品中心

Ultrasonic Level Meter - Integrated Type

Ultrasonic Level Meter - Integrated Type

Category: Ultrasonic Level Meter

8001@huadianauto.com

Product Introduction:

The integrated ultrasonic level meter is a digital level instrument controlled by a microprocessor. During measurement, pulse ultrasonic waves are emitted by the sensor (transducer), and the sound waves are reflected off the surface of the object and received by the same sensor, converting them into electrical signals. The distance from the sensor to the measured object is calculated based on the time between the emission and reception of the sound waves. Due to the use of non-contact measurement, the measured medium is almost unrestricted, making it widely applicable for measuring the height of various liquids and solid materials in industries such as environmental protection, water conservancy, chemical engineering, and metallurgy.

Core strengths:

Inquiry

E-mail

Details

Product Parameters

Cases

Download

Intelligent adjustment response, intelligent dual-line display

Fully physically sealed probe, special echo processing

Intelligent adjustable range

Multi-point emission circuit

Measurement Range	(0~5)m / (0~30)m
Accuracy	±0.3%FS / ±0.5%FS
Alarm Output	2 SPST channels (four-wire optional), capacity 250VAC, 3A
Communication Output	RS485 (four-wire optional), Modbus-RTU communication protocol
Power Supply	(18~28)VDC
Ambient Temperature	Instrument: (-20~60)℃, Probe: (-20~80)℃
Storage Temperature	(-20~80)℃
Protection Level	Instrument: IP65, Probe: IP68
Electrical Interface	M16*1.5 Cable Gland
Mounting Hole Thread	G2
Transmitter Output	(4~20)mA, current output accuracy 0.2%FS Two-wire: output load (U-18V)/0.02A, U is the supply voltage Four-wire: output load (U-14V)/0.02A, U is the supply voltage