Product Center

产品中心

Monocrystalline Silicon Pressure Transmitter - Ultra High Precision Model

Monocrystalline Silicon Pressure Transmitter - Ultra High Precision Model

Category: Pressure Transmitter

8001@huadianauto.com

Product Introduction:

The monocrystalline silicon pressure transmitter is used to measure the liquid level, density, and pressure of liquids, gases, or steam, and then convert these measurements into a 4-20mA HART current signal output. It can also communicate with BST9900, HART375, or BST Modem for parameter setting and process control.

Core strengths:

Inquiry

E-mail

Details

Product Parameters

Cases

Download

Accuracy up to 0.05%

The central sensing unit uses high-precision silicon technology

Patented dual overload protection diaphragm design, unidirectional overpressure up to 40MPa

Within the upper and lower limits of the range, it can be adjusted arbitrarily for wider adaptability

Model	HDP6000
Power Supply	24V
Measuring Medium	Air, water, oil and other media that do not corrode stainless steel and fluororubber
Enclosure Protection	IP67
Compensation Temperature	-10~70℃
Long-term Stability	±0.1%FS/3y
Natural Frequency	5KHZ~650kHz
Overload Pressure	150%F.S
Pressure Type	Gauge Pressure, Absolute Pressure
Measuring Range	0~0.6kPa…60MPa (Gauge Pressure)
Zero Temperature Drift	±(0.1+0.15TD)%F.S
Overall Accuracy	0.075 Class / 0.1 Class Optional
Operating Temperature	-40~85℃
Process Connection	Threaded Connection
Medium Temperature	-40~100℃